This Lock has been designed as an easy to use, highly visible, theft deterrent for all scooters, motorcycles and ATVs.
The Lock works by locking the front brake lever to the handlebar, preventing the vehicle from being pushed away.
Simple to use, highly visible, easy to use
Designed as strong enough and light in weight
Built-in stainless steel wire, difficult to cut with a saw
Widely used for all scooters, motorcycles and ATVs
Stops embarrassing falls - Unlike disc locks, you can't forget it's in place, no bending, no disc dirt or street grime.
Key not required to lock.
Twist grip sizes from 27-38mm
Used on the front brake lever will keep the bike from being pushed off the centre or side standUsed on the rear brake lever will hold the back tyre from spinning allowing for the loosening or re-torquing of the clutch nut when doing belt, clutch and variator maintenance
Fitting Your Lock:
Remove Lock from packaging, ensure the keys are seperated and the spare key is kept in a safe place.
Open Caps-Lock and install appropriate sized fitting pad to snuggly grip the throttle. Once you have chosen the correct pad you may choose to glue them in place
Click the lever retainer forwards or backwards by pushing at the base of it to adjust the lever setting. Caps-Lock can be installed with no pressure on the brake arm, this still immobilises the twist grip. If chosen to engage the front brake you only need light pressre for this to be effective.
Place the Caps-Lock over your throttle grip and front brake lever, push the locking button and relax
Unlock your Caps-Lock by inserting key and turning button releases. Remove from brake lever and bike grip
1 x Handlebar Grip Lock
2 x Key
2 x Fitting Pad
IMPORTANT: This is a popular sale item with limited inventory. We have some left in stock and they are available as of today: